iplaybit
  • 首页
  • 系统运维
  • IT新闻
  • 科技新闻
  • 关于我们
  1. 首页
  2. 系统运维
  3. 正文

centos 上安装nginx

2020年01月01日 426点热度 0人点赞 0条评论
 
一、安装nginx 
    1、在nginx官方网站下载一个包,下载地址是:http://nginx.org/en/download.html 
    2、WinSCP(ftp上传工具).exe FTP 上传工具上传达到CentOS中 
    3、我是先建一个目录,把要用的到的安装包放到一起. 
    #mkdir /home/ 
    #tar zxf nginx-1.4.1.tar.gz 
    #cd nginx-1.4.1 
    4、安装pcre开发包 
    #yum install -y pcre-devel
    5、如果安装出现在下面的错误是缺少编译环境。安装编译源码所需的工具和库 
    ./configure: error: C compiler cc is not found 
    #yum install gcc gcc-c++ ncurses-devel perl
    6、安装cmake,从http://www.cmake.org下载源码并编译安装 
    #yum -y install make gcc gcc-c++ ncurses-devel
    #yum -y install zlib zlib-devel
    7、如果需要ssl功能需要openssl库 
    #yum -y install openssl openssl-devel
 
     建立用户及组
    groupadd nginx
    useradd -g nginx nginx
    passwd nginx
 
    8、安装nginx 
    #cd nginx-1.4.1 
    #./configure --user=nginx --group=nginx --prefix=/usr/local/nginx
    #make
    #make install
 
     9、启动服务 
    #/usr/local/nginx/sbin/nginx  -c /usr/local/nginx/conf/nginx.conf 
    10、停止服务 
     #/usr/local/nginx/sbin/nginx -s stop 
    11、查看端口占用情况 
    #netstat -tunlp 
    12、如果其它机器无法访问,解决方法如下: 
    #/sbin/iptables -I INPUT -p tcp --dport 80 -j ACCEPT
    然后保存: 
    #/etc/rc.d/init.d/iptables save 
    重启防火墙 
    #/etc/init.d/iptables restart
 
以下是./configure的选项
--prefix=<path> - Nginx安装路径。如果没有指定,默认为 /usr/local/nginx。
--sbin-path=<path> - Nginx可执行文件安装路径。只能安装时指定,如果没有指定,默认为<prefix>/sbin/nginx。
--conf-path=<path> - 在没有给定-c选项下默认的nginx.conf的路径。如果没有指定,默认为<prefix>/conf/nginx.conf。
--pid-path=<path> - 在nginx.conf中没有指定pid指令的情况下,默认的nginx.pid的路径。如果没有指定,默认为 <prefix>/logs/nginx.pid。
--lock-path=<path> - nginx.lock文件的路径。
--error-log-path=<path> - 在nginx.conf中没有指定error_log指令的情况下,默认的错误日志的路径。如果没有指定,默认为 <prefix>/logs/error.log。
--http-log-path=<path> - 在nginx.conf中没有指定access_log指令的情况下,默认的访问日志的路径。如果没有指定,默认为 <prefix>/logs/access.log。
--user=<user> - 在nginx.conf中没有指定user指令的情况下,默认的nginx使用的用户。如果没有指定,默认为 nobody。
--group=<group> - 在nginx.conf中没有指定user指令的情况下,默认的nginx使用的组。如果没有指定,默认为 nobody。
--builddir=DIR - 指定编译的目录
--with-rtsig_module - 启用 rtsig 模块
--with-select_module --without-select_module - Whether or not to enable the select module. This module is enabled by default if a more suitable method such as kqueue, epoll, rtsig or /dev/poll is not discovered by configure.
//允许或不允许开启SELECT模式,如果 configure 没有找到更合适的模式,比如:kqueue(sun os),epoll (linux kenel 2.6+), rtsig(实时信号)或者/dev/poll(一种类似select的模式,底层实现与SELECT基本相 同,都是采用轮训方法) SELECT模式将是默认安装模式
--with-poll_module --without-poll_module - Whether or not to enable the poll module. This module is enabled by default if a more suitable method such as kqueue, epoll, rtsig or /dev/poll is not discovered by configure.
--with-http_ssl_module - Enable ngx_http_ssl_module. Enables SSL support and the ability to handle HTTPS requests. Requires OpenSSL. On Debian, this is libssl-dev.
//开启HTTP SSL模块,使NGINX可以支持HTTPS请求。这个模块需要已经安装了OPENSSL,在DEBIAN上是libssl
--with-http_realip_module - 启用 ngx_http_realip_module
--with-http_addition_module - 启用 ngx_http_addition_module
--with-http_sub_module - 启用 ngx_http_sub_module
--with-http_dav_module - 启用 ngx_http_dav_module
--with-http_flv_module - 启用 ngx_http_flv_module
--with-http_stub_status_module - 启用 "server status" 页
--without-http_charset_module - 禁用 ngx_http_charset_module
--without-http_gzip_module - 禁用 ngx_http_gzip_module. 如果启用,需要 zlib 。
--without-http_ssi_module - 禁用 ngx_http_ssi_module
--without-http_userid_module - 禁用 ngx_http_userid_module
--without-http_access_module - 禁用 ngx_http_access_module
--without-http_auth_basic_module - 禁用 ngx_http_auth_basic_module
--without-http_autoindex_module - 禁用 ngx_http_autoindex_module
--without-http_geo_module - 禁用 ngx_http_geo_module
--without-http_map_module - 禁用 ngx_http_map_module
--without-http_referer_module - 禁用 ngx_http_referer_module
--without-http_rewrite_module - 禁用 ngx_http_rewrite_module. 如果启用需要 PCRE 。
--without-http_proxy_module - 禁用 ngx_http_proxy_module
--without-http_fastcgi_module - 禁用 ngx_http_fastcgi_module
--without-http_memcached_module - 禁用 ngx_http_memcached_module
--without-http_limit_zone_module - 禁用 ngx_http_limit_zone_module
--without-http_empty_gif_module - 禁用 ngx_http_empty_gif_module
--without-http_browser_module - 禁用 ngx_http_browser_module
--without-http_upstream_ip_hash_module - 禁用 ngx_http_upstream_ip_hash_module
--with-http_perl_module - 启用 ngx_http_perl_module
--with-perl_modules_path=PATH - 指定 perl 模块的路径
--with-perl=PATH - 指定 perl 执行文件的路径
--http-log-path=PATH - Set path to the http access log
--http-client-body-temp-path=PATH - Set path to the http client request body temporary files
--http-proxy-temp-path=PATH - Set path to the http proxy temporary files
--http-fastcgi-temp-path=PATH - Set path to the http fastcgi temporary files
--without-http - 禁用 HTTP server
--with-mail - 启用 IMAP4/POP3/SMTP 代理模块
--with-mail_ssl_module - 启用 ngx_mail_ssl_module
--with-cc=PATH - 指定 C 编译器的路径
--with-cpp=PATH - 指定 C 预处理器的路径
--with-cc-opt=OPTIONS - Additional parameters which will be added to the variable CFLAGS. With the use of the system library PCRE in FreeBSD, it is necessary to indicate --with-cc-opt="-I /usr/local/include". If we are using select() and it is necessary to increase the number of file descriptors, then this also can be assigned here: --with-cc-opt="-D FD_SETSIZE=2048".
--with-ld-opt=OPTIONS - Additional parameters passed to the linker. With the use of the system library PCRE in FreeBSD, it is necessary to indicate --with-ld-opt="-L /usr/local/lib".
--with-cpu-opt=CPU - 为特定的 CPU 编译,有效的值包括:pentium, pentiumpro, pentium3, pentium4, athlon, opteron, amd64, sparc32, sparc64, ppc64
--without-pcre - 禁止 PCRE 库的使用。同时也会禁止 HTTP rewrite 模块。在 "location" 配置指令中的正则表达式也需要 PCRE 。
--with-pcre=DIR - 指定 PCRE 库的源代码的路径。
--with-pcre-opt=OPTIONS - Set additional options for PCRE building.
--with-md5=DIR - Set path to md5 library sources.
--with-md5-opt=OPTIONS - Set additional options for md5 building.
--with-md5-asm - Use md5 assembler sources.
--with-sha1=DIR - Set path to sha1 library sources.
--with-sha1-opt=OPTIONS - Set additional options for sha1 building.
--with-sha1-asm - Use sha1 assembler sources.
--with-zlib=DIR - Set path to zlib library sources.
--with-zlib-opt=OPTIONS - Set additional options for zlib building.
--with-zlib-asm=CPU - Use zlib assembler sources optimized for specified CPU, valid values are: pentium, pentiumpro
--with-openssl=DIR - Set path to OpenSSL library sources
--with-openssl-opt=OPTIONS - Set additional options for OpenSSL building
--with-debug - 启用调试日志
--add-module=PATH - Add in a third-party module found in directory PATH
 
 
标签: centos linux nginx
最后更新:2020年01月01日

iplaybit

点赞
< 上一篇
下一篇 >

文章评论

取消回复
最新 热点 随机
最新 热点 随机
Steam内存测试工具 SPDK详解 Hadoop之HDFS优缺点、设计原理、框架 tmpfs总结 当64核遇上PCIe 4.0 超级算力是这样建成的 Edge for Linux开发者预览将至 WSL子系统可运行带GUI的Linux应用程序
一口走天下!雷电4、USB4有啥不一样?Intel官方科普 Linux统计某文件夹下文件、文件夹的个数 紫光展锐全球首款6nm EUV SoC耗资超2亿美元打造 Linux 内存中的 Cache 真的能被回收么? 提升10倍内存带宽 AMD展示新一代X3D封装技术 欧洲核子研究中心首次测量到 反物质中的量子效应
一起来了解为双屏设备而生的Windows 10X系统
标签聚合
docker 3par intel windows cpu netapp 文件系统 hp san linux AMD redo 操作系统 数据库 存储 oracle

COPYRIGHT © 2020 iplaybit. ALL RIGHTS RESERVED.

京ICP备18020432号-1